- Seals[10]
- Furniture Casters[1]
- Thrust Roller Bearings[10]
- Thrust Ball Bearings[10]
- Self-aligning Ball Bearings[10]
- Spherical Roller Bearings[10]
- Deep Groove Ball Bearings[10]
- Cylindrical Roller Bearings[10]
- Angular Contact Ball Bearings[10]
- Taper Roller Bearings[7]
- Pillow Block Bearings[10]
- Needle Bearings[10]
- Linear Bearings[10]
- Other Bearings[1]
- Sliding Bearings[4]
- Special Bearings[3]
- Rod End Bearings[4]
- Auto Bearing[3]
- Machining Services[1]
- Pickaxe[2]
- Ceramic Ball Bearing[2]
- Contact Person : Mr. Zhu Jack
- Company Name : Jinan Xiangcheng International Co., Ltd.
- Tel : 0086-531-82391048
- Fax : 0531-82391048
- Address : Shandong,Jinan,No.47 Shanda Road
- Country/Region : China
- Zip : 250013
Thrust roller bearing 81104
The thrust roller bearings are used in withstanding the union load of axial load and radial direction load, but the radial load do not surpass the axial load's 55%. Comparing with other thrust roller bearings, this kind of bearings' friction factor is low, the rotational speed is high, and has self-aligning performance. The thrust cylindrical roller bearings and the thrust roller bearings are suitable for the rotational speed low situation, the thrust tapered roller bearings' rotational speed is higher than the thrust cylindrical roller bearing slightly. The thrust cylindrical roller bearings are the separation bearings, they can only withstand the unidirectional axial load and the slight impact, they can limit the axis (or outer covering) a direction axial translation, therefore they may be served as the unidirectional axial localization. But its bearing capacity is bigger than the thrust ball bearing by far. When the roller rolls, because the link speeds of the roller's both sides are different, the rollers will glide inevitably on the ferrule roller conveyer, therefore this kind of bearing's limited speed is lower than the thrust ball bearing, usually they are only suitable for the low speed situation. The stand design's thrust cylindrical roller bearings uses the vehicle system metal entity framers, according to user's request, we also use other patterns or the material framers. The thrust tapered roller bearings can only withstand the unidirectional axial load, they can limit the bearing unidirectional axial translation, so they may be served as the unidirectional axial localization. Comparing with the thrust cylindrical roller bearings, its bearing capacity is big, the relative sliding is small, but the limited speed is low. The thrust cylindrical roller bearing mainly uses in the heavy-duty machines, the high efficiency ship using machineries and gear boxes, petroleum drilling machines, vertical electrical machineries.
Thrust roller bearing 81104
